UnlockBase

Did you wish there was a hassle-free, secure method to unlock the Xiaomi Mi 11 that wouldn’t violate your warranty or harm your device?

This post will demonstrate the best way to use our service, to have your Xiaomi mobile phone unlocked for free in three minutes or less. Please read the complete post for a successful unlocking procedure.

Global Xiaomi Mi 11 Ultra Carrier Unlocking

Let’s say your phone is restricted to a US carrier, such as AT&T, MetroPCS, Sprint, or Verizon, and you want to go abroad. The only choice you have is to use another person’s carrier SIM to avoid paying the high roaming data rates.

To use another sim on your locked Xiaomi mobile you have to get it unlocked first. You can do that by using UnlocBase and requesting the Xiaomi Mi 11 unlock code

If the software on my Xiaomi Mi 11 has been altered, can I still unlock it?

Although we guarantee that our method of unlocking the Xiaomi Mi 11 will work with the stock software and any upcoming upgrades, we disclaim all liability in the event that the Xiaomi Mi 11’s software has been altered in any way.

The Xiaomi Mi 11 will need to be reset to factory settings, and you should be prepared for the chance that some of its crucial components could change throughout the unlocking process.

Advantages of Xiaomi Mi 11 Ultra Unlocked?

One of the main advantages of Xiaomi Mi 11 Ultra Unlocked is that you are no longer always required to use your current carrier; instead, you have the simple option of choosing your own network provider, which will function flawlessly on your Xiaomi Mi 11 Ultra Unlocked even if you are still bound by your operator’s contract and without voiding your warranty.

Xiaomi Mi 11 Ultra Unlocked: Steps to Unlock

It’s simpler than you would think to use an unlock code for Xiaomi Mi 11 Ultra locked phone. It doesn’t need any tools or expertise. Please take these actions:

1. Please visit https://www.unlockbase.com/unlock-phone/xiaomi/mi-11-ultra/
2. Choose the manufacturer of your mobile device.
3. Enter the IMEI number for your phone
4. Please validate your email address by entering it here.
5. You will be given the option to choose the country to which the phone is locked.
6. Select the network or provider to which the phone is locked.
7. Check to see whether your payment went through, then wait for an email with a confirmation.

Using an unlock code for the Xiaomi Mi 11 Ultra phone simplifies the procedure considerably. It doesn’t call for any equipment or prior knowledge on your side.

Please perform the following procedures:

• The original SIM card that comes with your phone should be removed.
• Insert whatever SIM card you want.
• On the screen, a box with an entry field should instantly appear so you may input the unlock code.
• Enter the unlock code that UnlockBase provided for you.
  

All that is to be stated is that. No matter where you are in the globe, you may use your unlocked Xiaomi Mi 11 Ultra phone with any network.

Conclusion

We have all felt ripped off by a phone contract at one point or another. Then should you ever go overseas, well, that’s an even better excuse to start ramping up the charges. Unlock your phone now to Maximize your phone’s capability! If you have any other ideas, let us know in the comment below!

The factory SIM unlock code for the Xiaomi phones are now available, which means that with the right NCK code, you may permanently unlock the Xiaomi Phones. By using the IMEI, we can simply open any Xiaomi device. If the phone requests an unlock code after swapping the SIM card, there is no need to alter the firmware.

The suggested way for unlocking the Xiaomi Phones is via code because you do not lose the phone’s warranty. It is the quickest and safest way to unlock a phone using the IMEI code. An unlocked phone may be used with any SIM card from any network on the globe.

Why Unlock Your Xiaomi Phone?

There’s no reason you shouldn’t unlock your smartphone now that it’s legal, right? That’s right, unlocking your smartphone gives you, the owner, additional control over your device.

So, if you have the opportunity, here are three compelling reasons to do so. It allows it to be used internationally without having to pay high fees. It will enable you to change carriers without buying a new phone. It increases the phone’s value if you decide to sell it.

Steps To Unlock Xiaomi Phone

UnlockBase Service is an excellent tool to utilize if you want to unlock your Phone. This instrument’s genuinely unique and fantastic aspect is its simplicity of use and convenience compared to other alternatives now available on the market. It is secure, legal, and, most importantly, can be completed independently using a basic step approach. It’s also a permanent solution, meaning that once you’ve broken the carrier lock, you’ll never have to do it again.

Go to: https://www.unlockbase.com/unlock-phone/
Select your Phone brand
Enter the IMEI or the Serial number of the device you want to unlock and the model and current network. To get your IMEI number, dial *#06# on your phone.
Type your email for confirmation.
Select the network’s country the phone is locked to,
Select your network/carrier, confirm your payment, and wait for an email confirmation.

• After getting the unlock code :
• Switch OFF to unlock Xiaomi phone
• Insert any other network provider SIM card
• Switch ON the phone. It should prompt for NCK / SIM Network Unlock PIN / 
• Enter the unlock code, which UnlockBase provides
• Your Xiaomi Redmi is unlocked permanently to use with all GSM SIM cards.

The Xiaomi Phone may be unlocked via code, which the manufacturer suggests. Because the unlock code originates from the manufacturer’s database, it will ultimately unlock your phone.

Not Sure If your Xiaomi Phone is Unlocked?

Place a different SIM card in the phone and turn it on to see whether it’s locked. Make sure you use another SIM card than the one that came with the phone.

Your phone is most likely locked if it won’t let you make calls and shows an error message like ‘SIM not valid,’ ‘phone Restricted,’ ‘SIM not accepted,’ or asking you to provide an unlock code.

Conclusion

The good news is that you’re done after you’ve network unlocked your smartphone, tablet, or portable hub; you don’t require service from your original carrier to unlock Xiaomi phone. Any appropriate SIM card may be installed, and as long as you have an account and credit with that network, you’ll be able to make calls, send SMS, and perhaps even go online.

This guide will show you how to bypass Google account on a Xiaomi phone. You may need to do this if you forget the password on your Google account and had reset the device using recovery mode. You don’t need a computer to accomplish this. Doing this process may or may not work depending on the model and/or software version running in your Xiaomi phone.

At the time when I wrote this guide and filmed the how-to video (that supplements this guide), it worked for me using a Xiaomi Mi Mix 2S running the latest MIUI 10.3.2.

Screenshot Guide: Bypass Google Account Xiaomi

1. From the “Verify your account” screen. Go back, until you see the list of WiFi networks.
2. Tap on “Add Network”.
3. Type “www.youtube.com” under “SSID”.
4. Long press “www.youtube.com”, until it’s highlighted in blue.
5. Above it, tap the second option.
6. The YouTube app should open. Search for “UnlockBase”.7. Select “UnlockBase”. From the results list.
7. Swipe to the left, and tap “About”.
8. Tap “Cellphone Unlocking”.
9. Choose “Browser”.
10. Tap “Agree & Continue”.
11. Search for “Lawnchair APK”. Using the address bar above.
12. Tap the one from APKMirror. It may or may not be first on the list.
13. Select the very first one. Usually, that’s the latest version.
14. Scroll down to download and click on the blue link.
15. Click on “Download APK”.
16. Tap “Allow”.
17. When prompted to Save APK, tap “OK”.
18. Once done downloading, tap “Settings”.
19. Enable “Allow from this source”.
20. Tap “Install”.
21. Tap “Open”.
22. Tap “Create”.
23. Tap “Allow”.
24. Go to “Settings”.
25. Tap “Lock screen & password”.
26. Tap “Screen Lock”.
27. Tap “PIN”.
28. Set a Pin. For this guide, I set it to 123456. But you can set whatever you want. Just remember it.
29. Confirm the PIN that you created.
30. When prompted to create a fingerprint, tap “Cancel”.
31. When done, reboot the phone.
32. Unlock the phone by swiping up and enter the pin that you created earlier.
33. When you see this screen, enter the PIN you created earlier.
34. When you see this screen, YOU DID EVERYTHING CORRECTLY! However, DON’T SIGN TO A GOOGLE AND MIUI ACCOUNT JUST YET.
35. Just skip both Google and MIUI sign in and go through setup.
36. At the end of the setup, you will be prompted what launcher to use. Choose “Lawnchair”.
37. Go back to “Settings”. It’s recommended to do a factory reset.
38. Tap “Additional Settings”.
39. Tap “Backup & reset”.
40. Tap “Erase all data (factory reset)”.
41. Tap “All files on the phone”, and then tap “Reset phone”.
42. Tap “next step” after the counter has elapsed.
43. Tap “OK” after the counter has elapsed.
44. The phone will reboot. Once booted back up, continue setting up the phone like you would with a new phone. You should be able to sign in to any other Google account! CONGRATULATIONS!

Have you tried ‘rooting‘ or installing ‘custom ROM’ on your Xiaomi device before? If you did, chances are your phone’s user interface don’t look similar to that of others in the same brand. Moreover, you could be experiencing lags, incompatible apps, or security issues having received no software update from the manufacturer.

Most importantly, this leads to breaking your phone or tablet’s warranty.

If you want to go back to the default firmware your Xiaomi phone or tablet used to have, this article will guide you step-by-step on how to flash the factory firmware back on your device.

Disclaimer: We are not representing Xiaomi. If you have any questions, please contact Xiaomi support. We are not liable for any consequences or damage taking the following steps may result in. Please use your discretion while following them.

WARNING: BACKUP YOUR FILES PRIOR TO FOLLOWING THIS GUIDE. THIS WILL WIPE THE DEVICE!

There is a YouTube video that supplements this guide:

Files that you will need to download:

To proceed, you’re going to need to download three things, so on your computer, follow the link provided below and download them accordingly.

– Google USB Driver – This will allow the computer to communicate with the phone.

– Xiaomi Flash Tool – This will flash the firmware to your device.

– MIUI Firmware –  Click on your device and download the ‘Stable ROM’ because this is what you need to restore on your device. I am doing this on a Pocophone F1, but this process should work on any Xiaomi devices (trust me, I owned several devices by them, and it’s the same procedure when restoring the firmware). Make sure to download the ‘Global’ version, not the ‘China’ one. The Global version has Google Play Store, but the China version does not.

Preparation

1. Go to your “C:” drive on My Computer/This Computer/Computer. Or Press Windows Key and R, then type in “C:\” without the quotation marks.
2. Create a new folder, called “Xiaomi”. Without the quotation mark.
3. Extract the contents of the three files you just downloaded. Once done, your Xiaomi folder should look like this
4. Extract the tar archive (that contains the firmware, has “global_images” somewhere in the file name) to the Xiaomi folder. It should look like this afterward.

Putting your phone to fastboot mode.

1. Turn off the phone.
2. Press Volume Down (-), and Power at the same time.
3. Let go when you see the fastboot logo.
4. Connect the phone to the computer.

Install the drivers

1. Go to the Device Manager.
2. If you are on Windows 10, simply right click on the Windows logo (lower left corner). Then select “Device Manager”.
3. On other versions of Windows. Press the Windows Key and R at the same time. Then type “devmgmt.msc” without the quotation marks.
4. Ensure that the “Android Bootloader Interface” is installed, under “Android Devices”, “LeMobile Android Device” or anything that says “Android”. It varies.
5. If not installed and you see “Android” under “Other Devices”. Double-click on “Android”.
6. Click on “Update Driver”.
7. Click on “Browse my computer for driver software.”
8. Click on “Let me pick from a list of available drivers on my computer.”
9. Click on “Show All Devices”
10. Click on “Have Disk…”.
11. Click “Browse”.
12. Navigate to the “usb_driver” folder on your “Xiaomi” folder. Then select “android_winusb”or “android_winusb.inf”. Click “Open”, then click “OK”.
13. Select “Android Bootloader Interface”, then click “Next”.
14. When Prompted, click “Yes”.
15. Once done, click “Close” twice, and exit out of Device Manager.

Flashing the firmware to the device

1. Navigate to the “MiFlashXXXXXXXX” (XXXXXXXX means the version of MiFlash) folder, and then double-click the “XiaomiFlash” or “XiaomiFlash.exe” file to start MiFlash.
2. On MiFlash, click on “Select”.
3. Navigate to the folder where you extracted the firmware earlier. (The directory where the “images” folder is located.
4. On the lower right of the window, select “clean all” to keep the bootloader unlocked (if you ever want to flash a custom ROM again in the future, without having to wait 72-360 hours again). Although leaving it unlocked will prevent some apps (like Pokemon Go and some banking apps from running). If you want to lock the bootloader after flashing, leave it at “clean all and lock”.
5. Click “refresh” and see if a device appears on the list. If your screen looks like this, then you are ready to proceed to the next step!
6. If not, then try disconnecting/reconnecting the device, moving it a another USB port, and restarting your computer. As a last resort, try reinstalling the driver. If you have it connected to a USB hub. Try connecting directly to your computer’s USB ports (as USB hubs could be causing the problem.)
7. Click “Flash” to commerce flashing.
   
8. Once flashing is done. Device will reboot. From there, set the phone up normally. Like you would like as if you took it out of its box.
   

And there you have it! Congratulations, your Xiaomi device is now back to its stock firmware! Now you’ll be able to enjoy all the manufacturer updates necessary to keep your device secure and running on optimal conditions. Want to share your thoughts? Drop them on the comments section below!